Air 4 Seasons Welcomes You to our Victoria’s Comfort Club

Victoria’s Comfort Club is the Air 4 Seasons preventive maintenance program that provides you with the peace of mind of having your air conditioning and heating system properly maintained and tuned up every year. Your heating and air conditioning system is the most expensive appliance you have in your home. Like your car, you need to perform routine maintenance to change the oil, clean out the filters and adjust the belts to ensure your car's efficiency and your safety. In the same way, your home comfort system has crucial parts that need to be professionally maintained and tuned-up on an annual basis.

Proper maintenance helps to:

• keep your system running as efficiently as possible
• Prolong the life of your system
• Lower your utility bills
• Save you from expensive repairs
• Save our planet from unnecessary pollution by ensuring your unit doesn’t have any leaks. Freon (refrigerant) leaks deplete the ozone layer

Regular service of your equipment can save you thousands of dollars over the long term in energy costs. In fact, as much as 30% per year! And regular service can extend the life of your system. Your membership will literally pay for itself after a year.

• Receive an annual maintenance on your home comfort system and a safety check.
• Receive priority service. First priority appointment.
• Receive 5% discounts on repairs & replacements
• Get the best trained, drug free, background checked technicians in the industry
• Get Lower Utility bills because well maintained system uses less energy to operate.
• Get Fewer Repairs because industry studies have shown that annual preventive maintenance helps prevent 85% of all repairs.
• Extend the life of your system because properly maintaining your system keeps it at its peak performance at all times. This helps the longevity of your system and keeps your warranty in place.
• Be comfortable year around because clean, well maintained system delivers more comfort by being a better operating system
• Breathe a cleaner air because properly maintained systems help with allergies and asthma.
• Transfer your membership to a New Homeowner or Your New Home  within our service area.

Professionally trained, background checked, and courteous technicians will perform once a year a 40-60 minute tune-up and professional cleaning as follows:

AIR CONDITIONING SYSTEM REJUVENATION and SAFETY 24 Point Check-Up

AC Tune-up, Professional Cleaning, and Safety Inspection

1. Technician will record make, model and serial numbers of your equipment in our computer system that will help us and help you if your system fails.
2. Adjust Thermostat calibration
3. Clean or replace filters as needed (1” included)
4. Check condenser pressure and refrigerant levels
5. Check fan blades and fan motor
6. Check and clean outdoor coil
7. Check indoor coil
8. Inspect service valves
9. Examine temperatures differences in return and supply
10. Check the condition of Blower Belt, if applicable
11. Check primary and secondary drain lines
12. Check secondary drain pan
13. Monitor compressor for amperage, high/low voltage wiring
14. Tighten all electrical connections
15. Lubricate all moving parts where necessary
16. Inspect disconnect box for proper rating and installation
17. Examine contactors for burned and/or pitted contacts
18. Examine capacitors
19. Confirm proper return air and size
20. Check Unit for Time Delay Relay
21. Check Unit for Isolation Pads
22. Inspect suction line for proper fittings
23. Inspect all fittings for signs of oil and/or leakage
24. Make any recommendations needed to improve performance of system

HEATING SYSTEM REJUVENATION AND SAFETY 22 Point Check-Up

Furnace Tune-up, Professional Cleaning, and Safety Inspection

1. Technician will record make, model and serial numbers of your equipment in our computer system that will help us and help you if your system fails
2. Calibrate and level thermostat
3. Clean or replace 1" regular filters as needed
4. Monitor volts/amps on fan motor
5. Lubricate and inspect bearing for wear
6. Take amperage reading on blower motor for proper operation
7. Test blower motor capacitor
8. Check blower motor bearings (oil if possible)
9. Check blower belts & pulleys (if applicable)
10. Inspect blower
11. Tighten all electrical connections
12. Inspect safety devices for proper operation
13. Inspect electrical for exposed wiring
14. Monitor flue draft
15. Inspect heat exchanger for dangerous cracks and wear
16. Check for gas leakage
17. Measure temperature difference-supply/return
18. Measure and adjust gas pressure for peak efficiency
19. Test ignition system for proper operation
20. Inspect duct work for energy loss
21. Test air flow duct system for carbon monoxide
22. Make any recommendations needed to improve performance of system

Remember, a central air conditioning and furnace system is only as good as the maintenance you provide it. Don’t you think it is worth it to protect the mayor investment in your home? Ask for our Victoria’s Comfort Club membership now!  

Please, click here to request pricing information.